This can be an excellent bonding time
between you and your kids. As a father, finding time to play with the kids is
getting harder. The
economy is on a downward spiral and you have to take up more working
hours to make ends meet. Involving your kids in your DIY projects is excellent
because you get to kill two birds with one stone.
The thing is, you might not find the right
sack track in the market to suit your needs. Even if you can, it’s always good
to find out how handy you are. Take up this project as an adventure that allows
you to learn a new skill.
Reusing supplies is an excellent
contribution to environmental conservation. You shouldn’t have to buy something
when you can easily make it with what you already have. DIY projects are also
quite cost-effective, you’ll surely save a few bucks.
What You’ll Need
·
Shopping cart
·
Safety glasses
·
Angle grinder
·
Dust mask
·
Spool gun
·
Solar Welder
·
Flux core welding wire
·
Respirator mask
Making the Sack Truck
1. Work on the Shopping Carts
Source:
Pexels
To begin with, you need to remove the
basket from your shopping cart. The bases attached to the wheels should be flat
because these are the parts you need for your sack trucks.
Removing the basket requires surgical
planning so you don’t mess up with the structure of the cart. The handle and
the rear cross brace need to be cut off with precision. Next, remove the bottom
platform made from heavy wire and save it because you’ll use it later.
2.
Make Incisions
For this step, you’re going to need safety
glasses to ensure the small pieces of metal don’t get in your eyes. If you can
find a leather apron, this would be great because then you can keep the mental
particles off your clothes as well.
Since you’ll be grinding, wear a grinding
face shield because the safety glasses alone do not protect your entire face.
The angle grinder should have thin cutoff wheel if you’re to achieve precise
incisions. Use it to cut off everything except the wheels of the cart.
3.
Make the Frame Narrower
To make the frame narrower, all you have to
do is bend it into a U shape. This is necessary because if you leave it as is,
you’ll end up bumping into door frames when you use it.
4.
Straighten the Wheels
When you bend the frame, the wheels
automatically bend as well. You need to make them parallel so your sack truck
runs smoothly.
5.
Weld a Scoop onto the Bottom
Platform
Remember the bottom platform that you cut
off and saved for later? Here is where you use it. You’ll need a sheet of steel
attached to the bottom platform to act as your sack truck’s scoop.
Use the solar welder, the core welding wire
and the spool gun to make the attachment sustainable. Remember to wear your
respirator mask under the welding helmet to avoid manganese
poisoning.
6.
Attach the Bottom Platform back
to the Cart
Weld the bottom platform back to the cart.
Add a piece of wire at the junction between the scoop and the bottom platform
to give your sack truck more strength.
Be sure to paint your sack truck so it
looks presentable.
Conclusion
As you can see, building a sack truck at
home is not that hard. In fact, you can make as many sack trucks as you want,
as long as you have the right trolleys.
*This post was written in collaboration with a third party, the words expressed are my own"
No comments:
Post a Comment